Portable power station Anker 521 PowerHouse 256 Wh

Specifications:

Cell capacity: 256 Wh

Life cycle: 3000 cycles at > 80% capacity

Operating temperature: 0 °C - 40 °C

Ambient temperature: 0 °C - 40 °C

Size: 21.6 x 21.14 x 14.4 cm

Weight: 4.34 kg

Entrance :

DC input: 11-28 V⎓5.5 A (65 W max); USB-C input: 5 V⎓3 A / 9 V⎓3 A / 15 V⎓3 A / 20 V⎓3 A (60 W max)

Release:

Car charger output: 12V⎓10A; AC socket: 110 V~ 1.82 A, 50 Hz/60 Hz, 200 W; USB-A output 5 V⎓3.6 A (2.4 A max per port); USB-C output: 5 V⎓3 A / 9 V⎓3 A / 15V⎓3 A / 20 V⎓3 A (60 W max)

Remarks :

• When the control buttons are switched on, even if no appliance is being charged, a certain amount of energy is always consumed when there is no load. It is therefore advisable to switch off the control buttons after using them to avoid over-consumption of energy.
• Incompatible with appliances requiring an input of more than 200 W: microwave oven, electric grill, refrigerator, electric vehicle, air compressor, etc.
• Do not use with a CPAP at night or in energy-saving mode.
• The station provides continuous charging when connected via a car or AC socket.
• Remove the protective film from the screen before using it for the first time.
• If you have the impression that the battery discharges quickly when you first use it, this is because the remaining power display information is inaccurate when the product is first activated. The remaining power will be automatically calibrated by discharging the battery to 1% and then recharging it to 100%.